The STRIKER Cast app disconnects from
the device after about one minute of
inactivity (being in the background). The
device turns off automatically after 2
minutes of being disconnected from the
app and out of the water.
Connecting a Mobile Device
You must connect the STRIKER Cast
device to the STRIKER Cast app on your
mobile device to see sonar data.
TIP: The status LED flashes green and
red when the device is ready to connect to
the STRIKER Cast app.
1
From the app store on your mobile
device, install and open the STRIKER
Cast app.
2
Sign in to your Garmin
®
account.
TIP: If you do not have an account,
select Create One.
3
Put the device in water, with the two
pins in contact with the water, to
turn on the STRIKER Cast device and
prepare it to connect.
TIP: You can also connect the device
to USB power and then immediately
disconnect it to turn on the device and
prepare it to connect.
The status LED flashes green and red
when the device is ready to connect to
the STRIKER Cast app.
4
Select Connect > Start.
5
Select your device from the list.
The serial number is printed on the
bottom of the device.
After you connect successfully, a message
appears, and you can see sonar data
when the device is in the water.
Attaching a Fishing Line or Tether
You can use the included nylon tether or
attach the device to a fishing line on a
fishing rod.
Quick Start Manual
3
