StreetPilot 7200/7500 Owner’s Manual
57
A
PPENDIX
USB Interface Troubleshooting
Problem/Question
Solution/Answer
How do I know my
StreetPilot is in USB
Mass Storage Mode?
When your StreetPilot is in USB Mass Storage Mode, a picture of a
StreetPilot connected to a computer is shown. Also, your computer should
show a new Removable Disk drive listed in My Computer.
My computer never
senses that the
StreetPilot is connected.
1. Unplug the USB cable from your computer.
2. Load the USB drivers to your computer. See
page 21
.
3. Plug the USB cable into your computer. Select
USB Mass Storage
.
I cannot find any drives
named “GARMIN” in my
list of drives.
Try the solution listed above.
If you have several network drives mapped on your computer, Windows may
have trouble assigning drive letters to your StreetPilot drives. Follow the
steps on the
next page
to assign your drive letters.
A message saying
“Unsafe Removal of
Device” appears when I
unplug the USB cable.
When you are ready to disconnect your StreetPilot from your computer,
double-click the
Unplug or Eject
icon in your system tray. Select “USB
Mass Storage Device” and click
Stop
. Select the StreetPilot drives and click
OK
. You can disconnect your StreetPilot from your computer now.
Summary of Contents for STREET PILOT 7200
Page 1: ...Owner s Manual portable car navigation StreetPilot 7200 7500...
Page 73: ......
