Garmin RV-BBT600 Series, Owner'S Manual, Page: 17 / 26

stereo, and the camera microphone to the Aux 2 input (if
applicable). To show the camera automatically, you must
connect the camera to the camera trigger wire. For more
information about the stereo connections, see the RV-BBT600
Series Installation Instructions .
The stereo shows only one camera at a time and cannot switch
between cameras. Connecting multiple cameras requires an
external switching mechanism. This is typically available only for
professional or manufacturer installations.
Viewing a Vehicle Camera
Before you can view a vehicle camera, a compatible camera
must be connected to the stereo, and the remote must be
docked.
1
Select an option to view a vehicle camera:
• To automatically show the backup camera, place the
vehicle into reverse.
• To automatically show a side-mirror camera, activate the
vehicle turn signal.
NOTE: This option is typically available only as a
manufacturer option on select vehicles, and may not be
available on your vehicle.
• To manually show the backup camera, select Camera .
The vehicle camera view appears on the screen.
2
If available, select to mute or unmute audio from the
camera microphone.
TIP: If the vehicle camera microphone is connected and this
option is not available, verify the microphone is enabled
( Enabling the Vehicle Camera Microphone , page 13 ).
3
Select an option to resume normal operation:
• Take the vehicle out of reverse.
• Deactivate the vehicle turn signal.
• Select
.
Enabling the Vehicle Camera Microphone
Before you can enable the vehicle camera microphone, it must
be connected to the Aux 2 input on the stereo.
If the connected vehicle camera includes a microphone, you can
enable or disable the microphone in the camera viewer.
Select Camera > > Mic Installed .
When the microphone is enabled, appears on the camera
screen.
Hands-Free Calling
NOTE: While most phones are supported and can be used, it
cannot be guaranteed that a particular phone can be used. All
features may not be available for your phone.
Using Bluetooth wireless technology, your device can connect to
your mobile phone to become a hands-free device ( Pairing Your
Phone or Media Player , page 2 ). While connected, you can
place or receive calls using your device.
Downloading Contacts and Call Logs
You must download the call logs and contacts from your
connected smartphone before you can access them in the
Phone app on the stereo. To prevent interruption to music
streaming, the device does not download these items
automatically when you pair or connect your smartphone.
1
From the Phone app, select Call Logs or Contacts .
2
Select > Download .
The stereo downloads the contacts and call logs from your
smartphone. If you are playing music over the Bluetooth
connection, the music playback pauses until the download is
complete.
TIP: If the stereo cannot download contacts and call logs, you
should go to the Bluetooth settings on your smartphone and
verify the RV-BBT60X device has permission to access
contacts, call logs, or the phone book. For more information
about setting permissions for Bluetooth devices, see the owner's
manual for your smartphone.
Placing a Call
1
Select Phone .
2
Select an option:
• To dial a number, select
Dialpad , enter the phone
number, and select .
• To call a recently dialed or received phone number, select
Call Logs , and select a number.
• To call a contact from your phone book, select Contacts ,
and select a contact.
Receiving a Call
When you receive a call, select Answer or Decline .
Saving a Phone Number as a Preset
You can save up to three contacts as presets on the dial pad.
This allows you to quickly call your home phone number, family
members, or frequently called contacts.
1
Select Phone > Dialpad .
2 Hold a preset number, such as Preset 1 .
3 Select a contact.
Voice Command
NOTE: Voice command is not available for all languages and
regions, and may not be available on all models.
NOTE: Voice Activated Navigation may not achieve desired
performance when in a noisy environment.
Voice command allows you to use your device by saying words
and commands. The voice command menu provides voice
prompts and a list of available commands.
Activating Voice Command
1
Say Voice Command .
The voice command menu appears.
2
Say a command from the menu.
3
Respond to the voice prompts to complete the search or
action.
Voice Command Tips
• Speak in a normal voice directed at the device.
• Reduce background noise, such as voices, or the radio, to
increase the accuracy of the voice recognition.
• Speak commands as they appear on the screen.
• Respond to voice prompts from the device as needed.
• Increase the length of your wakeup phrase to reduce the
chance of accidental voice command activation.
• Listen for two tones to confirm when the device enters and
exits voice command.
Starting a Route Using Voice Command
You can say the names of popular, well-known locations.
1
Say Voice Command .
2
Say Find Place .
Hands-Free Calling 13