6
Rino650QuickStartManual
Scanning Channels
You can scan the channels for voice
activity.
Select
Radio
>
Scan
.
Setting Up a Scan List
You can pick which channels and codes
to scan. Selecting specific channels and
codes reduces the scan time and helps
prevent missing a transmission.
1. Select >
Setup Scanlist
.
2. Select a channel to add.
3. Select .
Monitoring for activity
You can monitor a single channel for
any activity, including static and weak
voice signals. This is helpful if a signal
is going out of range.
Select
Radio
>
Monitor
.
Muting the radio
1. Select .
2. Select
Volume
.
Contacts
The first time a signal is received from
another Rino user, the new contact
page appears. From that page you
can show their location on the map,
navigate to their location (
page 7
), or
add them to your contacts list.
Saving a new Contact
When a new contact signal is received,
the new contact page appears.
Select
OK
to save the contact.
Editing Contacts
1. Select
Contacts
.
2. Select a contact.
3. Select an item.
4. Select .
Viewing Contacts on the Map
1. Select
Contacts
.
2. Select a contact.
3. Select
View Map
.
