Marking your current location
1.
Press the user button (under the power
button)
2.
Edit the waypoint name to suit. Eg.
footprint1
or
searchstart1
3.
Press Save
___________________________________
To go to a new location specified by a
14 figure grid reference
1.
Select Where To?
2.
Select Coordinates.
3.
Your current location GR will be shown.
4.
Use the arrow keys and the touchscreen
to highlight and then edit coordinates,
including leading zeroes and zones (eg:
55H)
5.
Tap
to save changes
6.
Tap Move to Location to begin travelling
to the new waypoint.
___________________________________
Editing a waypoint
1.
Swipe up
on home screen
then select Waypoint Manager.
2.
Select the appropriate waypoint
3.
Select the item you wish to edit (eg:
coordinates)
4.
Enter the new information
5.
Tap
to save
___________________________________
Finding/moving to a waypoint
1.
Select Where To on home screen.
2.
Waypoints will be top of the list (but only
if there are some waypoints saved on
the unit.) Tap and select a Waypoint
from the list.
3.
The Map screen will appear, showing the
Waypoint.
4.
Press Go. The map view may suffice as
a guide.
5.
Or tap
to close the page then select
Trip Computer, and follow the bearing
suggested to the waypoint via the most
appropriate route using hardcopy map
and orienteering compass.
6.
A third alternative is to select Compass
and use the arrow as a guide.
___________________________________
Setting the brightness and touchscreen
sensitivity
▪
To change the brightness, briefly press the
power button and then use the
touchscreeen to set.
▪
To change the sensitivity of the
touchscreen, swipe
and
select Setup > Accessibility > Touch
sensitivity.
Reset
If the GPS stops responding and you need
to reset it, simply remove the batteries and
then reinstall them. You will not lose any
waypoints, data, etc.
___________________________________
Compass
The GPS' internal compass is an electronic
compass, not GPS-based, so it will work
even if not moving.
Lost the Home Screen?
If you have this screen, swipe RIGHT to get
back to the Home Screen:
If you have this screen swipe DOWN
to get
back to the Home Screen:
The BSAR settings seem to be wrong?
If the screens and settings are not right,
they may have been changed by a previous
user (which should not happen.)
See the FO or an expert user who will select
a fresh BSAR profile. This will return the
unit to the BSAR standard configuration.
Version 4.0 LS Oct 2017