nüvi 800 Series Owner’s Manual
Getting Started
Step 1: Install the Battery
1. Locate the rectangular lithium-ion
battery that came in the product box.
2. Slide the battery cover off the back of
the nüvi.
3. Locate the metal contacts on the end
of the lithium-ion battery.
4. Insert the battery so that the metal
contacts on the battery match up with
the metal contacts inside the battery
compartment.
5. Press the battery down into place.
6. Slide the battery cover back on until it
clicks into place.
Step 2: Mount the nüvi
1. Plug the vehicle power cable into the
power connector on the right side of
the cradle.
Power
cable
Cradle
Microphone
jack
2. Snap the cradle onto the suction cup
arm.
Suction cup
mount
3. Clean and dry your windshield with
a lint-free cloth. Remove the clear
plastic from the suction cup, and
clean it with a lint-free cloth. Place
the suction cup on the windshield.
