nüvi 100 series Quick Start Manual
Setting Up Your nüvi
Before mounting the nüvi, see the
Important Safety and Product Information
guide for information
about laws pertaining to windshield mounting.
Mount your nüvi
1. Plug the vehicle power cable into the back of your nüvi.
2. Snap the cradle onto the suction cup arm.
3. Remove the clear plastic from the suction cup.
Place the suction cup on the windshield.
4. Flip the lever back toward the windshield.
5. Plug the other end of the vehicle power cable
into a power outlet in your vehicle. Your unit
should turn on automatically if it is plugged in and the vehicle is running.
Follow the on-screen instructions.
6. Tilt your nüvi back until it snaps into place.
7. Fit the bottom of your nüvi into the cradle.
8. If you are using a traffic receiver in Europe,
connect the external antenna to the traffic
receiver and secure it to the windshield using
the suction cups. (Traffic receivers are included
in some nüvi 205 series packages.)
Vehicle power
cable
Vehicle power
cable
Suction cup mount
Cradle
Suction cup mount
Cradle
Warning
: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
