Garmin MARQ CAPTAIN, Quick Start Manual

Page: 17 / 48

MARQ Captain 13
EN
2 Wait while the device locates
satellites.
The screen displays the regatta
timer ① and time to burn ② .
3 Select START .
4 Select UP and DOWN to
synchronize the regatta timer with
the official race countdown.
NOTE: When the burn time is
negative, you will arrive at the start
line after the race starts. When the
burn time is positive, you will arrive
at the start line before the race
starts.
5 Select START to start the timer.
Tack Assist
While cruising or racing into the wind,
the tack assist feature can help you
determine if your boat is being lifted or
headed. When you calibrate tack assist,
the device captures your boat’s port ①
and starboard ② course over ground
(COG) measurements, and uses the
COG data to calculate the mean true
wind direction ③ and the boat’s tack
angle ④ .
The device uses this data to determine
whether your boat is being lifted or
headed due wind shifts.
By default, the device tack assist is set
to automatic. Each time you calibrate
the port or starboard COG, the device
recalibrates the opposite side and true
wind direction. You can change the tack
assist settings to enter a fixed tack
angle or true wind direction.
MARQ Captain 英日[100x105mm]-8.indd 13 2019/4/24 下午 03:39:27