Garmin MARQ AVIATOR, Quick Start Manual

Page: 18 / 52

14 MARQ Aviator
EN
Adding Alternate Time Zones
During the initial setup, you can select
two alternate time zones to appear on
the watch face.
1 Select an option:
• Select Use Airport Ident . To
search for a time zone by entering
the alphanumeric identifier for an
aviation waypoint.
• Select Use Map to choose a time
zone for a geographic location.
2 If necessary, select Yes to rename
the zone.
The current time of day in the selected
time zones appears on the watch face.
Flying Activity
A flying activity starts automatically
when your detected climb rate exceeds
the value you set in the auto fly
settings. The default auto fly value is
500 fpm.
You can set up your MARQ device
to automatically connect to a paired
Connext device when a flying activity
starts. This allows your MARQ device to
display aircraft information.
Starting a Flight
1 From the clock, select START .
2 Select FLY .
3 If necessary, go outside and wait
while the device locates satellites.
4 Select START to start the flight
timer.
NOTE: Your activity data is recorded
only while the flight timer is
running.
5 Start your activity.
6 After you complete your activity,
select START > Save .
Navigating to the Nearest Airport
1 Hold BACK .
A list of the nearest airports
appears.
2 Select an airport.
3 Select Direct-To to begin
navigation.
MARQ Aviator 英日[100x105mm]-6.indd 14 2019/4/24 下午 03:36:17