System Overview
190-01499-02
GTX 3X5 Transponder TSO Installation Manual
Rev. 9
Page 1-13
1.14 Certification
The GTX 3X5 meets compliance with the TSO(s) when interfaced with equipment and installed in accordance with the
requirements and limitations as outlined in this manual.
FIS-B information, including weather information, NOTAMs, and TFR areas, are intended to assist in long- and near-
term planning decision making. The system lacks sufficient resolution and updating capability necessary for aerial
maneuvering associated with immediate decisions.
The Appliance Project Identifier (API) for the GTX 3X5 is GMN-01216. The API is used for project identification with the
FAA. To identify appliance approvals refer to applicable hardware and software part numbers.
Table 1-13 TSO Compliance
[1] With internal GPS.
[2] With optional GAE module.
[3] For software v2.05 or earlier, the units are Level 2 els.
GTX
335
GTX
345
TSO
Class and
Level
Function
X [2]
X [2]
TSO-C88b
--
Automatic Pressure Altitude Reporting Code-
Generating Equipment
X
X
TSO-C112e
Class 1
Level 2ens
[3]
Air Traffic Control Radar Beacon System / Mode Select
(ATCRBS/Mode S) Airborne Equipment
X [1]
X [1]
TSO-C145d
Class B2
Airborne Navigation Sensors Using the Global
Positioning System Augmented by the Satellite Based
Augmentation System
X
TSO-C154c
Class A1S
Universal Access Transceiver (UAT) Automatic
Dependent Surveillance – Broadcast (ADS-B) Equipment
Operating on Frequency of 978 MHz
X
TSO-C157a
Class 1
Aircraft Flight Information Services – Broadcast (FIS-B)
Data Link System and Equipment
X
TSO-C166b
Class B1S
Extended Squitter Automatic Dependent Surveillance –
Broadcast (ADS-B) and Traffic Information Service –
Broadcast (TIS-B) Equipment Operating on the Radio
Frequency of 1090 Megahertz (MHz)
X
Class A1S
X
TSO-C195a
Class C1,
C2, C3, C5
Avionics Supporting Automatic Dependent Surveillance
– Broadcast (ADS-B) Aircraft Surveillance Applications
(ASA)