Installing the Fist Microphone
and Mount
Before you can attach the fist microphone
mount to your dashboard, you must select
a suitable location on the dashboard.
WARNING
It is your responsibility to ensure the
mounting location complies with all
applicable laws and ordinances, and does
not block your view of the road during the
safe operation of your vehicle.
NOTICE
Avoid wires, gauges, air bags, air bag
covers, HVAC, and other items when
drilling pilot holes and attaching the mount
to the vehicle. Garmin
®
is not responsible
for any damages or consequences arising
from the installation.
1
Align and insert the connector on the
fist microphone onto the Group Ride
Radio mount.
2
Tighten the collar around the
connected cable.
3
Place the mount on the selected
location.
4
Using the mount as a template, mark
the three screw locations.
5
Drill pilot holes (optional).
For some types of mounting material,
drilling pilot holes is necessary.
6
Securely fasten the mount to the
surface using the supplied screws .
7
Slide the fist microphone onto the
mount.
Group Ride Radio
Specifications
Water
resistance
IEC 60529 IPX7
1
Operating
temperature
range
From -20° to 55°C
(from -4° to 131°F)
Charging
temperature
range
From 0° to 45°C
(from 32° to 113°F)
1
The device withstands incidental exposure to
water of up to 1 m for up to 30 min. For more
information, go to www.garmin.com/waterrating.
Quick Start Manual
3