2
Select a track color.
Saving the Active Track
The track currently being recorded is called the active track.
1
Select
Info
>
User Data
>
Tracks
>
Save Active Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Select
Save
.
Viewing a List of Saved Tracks
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
Editing a Saved Track
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Review
>
Edit Track
.
4
Select an option:
• Select
Name
, and enter the new name.
• Select
Track Color
, and select a color.
Saving a Track as a Route
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Select
>
Edit Track
>
Save as Route
.
Browsing for and Navigating a Recorded Track
Before you can browse a list of tracks and navigate to them, you
must record and save at least one track (
).
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Follow Track
.
4
Select an option:
• To navigate the track from the starting point used when
the track was created, select
Forward
.
• To navigate the track from the destination point used
when the track was created, select
Backward
.
5
Review the course indicated by the colored line.
6
Follow the line along each leg in the route, steering to avoid
land, shallow water, and other obstacles.
Deleting a Saved Track
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Delete
.
Deleting All Saved Tracks
Select
Info
>
User Data
>
Delete User Data
>
Saved
Tracks
.
Retracing the Active Track
The track currently being recorded is called the active track.
1
Select
Info
>
User Data
>
Tracks
>
Follow Active Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Review the course indicated by the colored line.
4
Follow the colored line, steering to avoid land, shallow water,
and other obstacles.
Clearing the Active Track
Select
Info
>
User Data
>
Tracks
>
Clear Active Track
.
The track memory is cleared, and the active track continues
to be recorded.
Managing the Track Log Memory During Recording
1
Select
Info
>
User Data
>
Tracks
>
Active Track Options
.
2
Select
Record Mode
.
3
Select an option:
• To record a track log until the track memory is full, select
Fill
.
• To continuously record a track log, replacing the oldest
track data with new data, select
Wrap
.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate but
fills the track log faster. The resolution interval is recommended
for the most efficient use of memory.
1
Select
Info
>
User Data
>
Tracks
>
Active Track Options
>
Interval
.
2
Select an option:
• To record the track based on a distance between points,
select
Interval
>
Distance
>
Change
, and enter the
distance.
• To record the track based on a time interval, select
Interval
>
Time
>
Change
, and enter the time interval.
• To record the track plot based on a variance from your
course, select
Interval
>
Resolution
>
Change
, and enter
the maximum error allowed from the true course before
recording a track point. This is the recommended
recording option.
Boundaries
Boundaries allow you to avoid or remain in designated areas in
a body of water. You can set an alarm to alert you when you
enter or exit a boundary.
You can create boundary areas, lines, and circles using the
map. You can also convert saved tracks and routes into
boundary lines. You can create a boundary area using
waypoints by creating a route from the waypoints, and
converting the route into a boundary line.
You can select a boundary to act as the active boundary. You
can add the active boundary data to the data fields on the chart.
Creating a Boundary
1
Select
Info
>
User Data
>
Boundaries
>
New
.
2
Select a boundary shape.
3
Follow the on-screen instructions.
Converting a Route to a Boundary
Before you can convert a route to a boundary, you must create
and save at least one route (
).
1
Select
Info
>
User Data
>
Routes & Auto Guidance Paths
.
2
Select a route.
3
Select
Review
>
Edit Route
>
Save as Boundary
.
Converting a Track to a Boundary
Before you can convert a track to a boundary, you must record
and save at least one track (
).
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Edit Track
>
Save as Boundary
.
Editing a Boundary
1
Select
Info
>
User Data
>
Boundaries
.
2
Select a boundary.
3
Select
Review
.
22
Navigation with a Chartplotter
