background image

Customizing the Startup Screen

You can personalize the startup, splash screen on your 

chartplotter.

1

Insert a memory card that contains the image you want to 

use.

2

Select 

Settings

 > 

System

 > 

Sounds and Display

 > 

Startup 

Image

 > 

Select Image

.

3

Select the memory card slot.

4

Select the image.
For the best results, use an image that is 50 MB or less.

5

Select 

Set as Startup Image

.

To view the splash screen with the new image, turn the 

chartplotter off and on.

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the 

power is applied. Otherwise, you must turn on the chartplotter by 

pressing  .

Select 

Settings

 > 

System

 > 

Auto Power Up

.

NOTE: 

When Auto Power Up is On, and the chartplotter is 

turned off using  , and power is removed and reapplied 

within less than two minutes, you may need to press   to 

restart the chartplotter.

Automatically Turning Off the System

You can set the chartplotter and the whole system to turn off 

automatically after it has been asleep for the selected length of 

time. Otherwise, you must press and hold   to turn off the 

system manually.

1

Select 

Settings

 > 

System

 > 

Auto Power Off

.

2

Select an option.

ActiveCaptain

 App

 CAUTION

This feature allows users to submit information. Garmin makes 

no representations about the accuracy, completeness, or 

timeliness of information submitted by users. Any use or reliance 

on the information submitted by users is at your own risk.

NOTE: 

You must connect the chartplotter to a Wi

Fi

®

 adapter to 

use the ActiveCaptain feature.
The ActiveCaptain app provides a connection to your GPSMAP 

device, charts, maps, and the community for a connected 

boating experience.
On your mobile device with the ActiveCaptain app, you can 

download, purchase, and update maps and charts. You can use 

the app to easily and quickly transfer user data, such as 

waypoints and routes, connect to the Garmin Quickdraw 

Contours Community, and update device software. You can also 

plan your trip, and view and control the GPSMAP device from 

the app.
You can connect to the ActiveCaptain community for up-to-date 

feedback on marinas and other points of interest. The app can 

push smart notifications, such as calls and texts, to your 

chartplotter display when paired.

ActiveCaptain Roles

Your level of interaction with the GPSMAP device using the 

ActiveCaptain app depends on your role.

Feature

Owner Guest

Register device, built-in maps, and supplemental map 
cards to account

Yes

Update software

Yes

Yes

Feature

Owner Guest

Automatically transfer Garmin Quickdraw contours you 
have downloaded or created

Yes

Push smart notifications

Yes

Yes

Automatically transfer user data, such as waypoints 
and routes

Yes

Begin navigating to a specific waypoint or navigating a 
specific route, and send that waypoint or route to the 
GPSMAP device

Yes

Yes

Getting Started with the ActiveCaptain App

NOTE: 

The ActiveCaptain feature is only available on models 

that have Wi

Fi technology.

You can connect a mobile device to the GPSMAP device using 

the ActiveCaptain app. The app provides a quick and easy way 

for you to interact with your chartplotter and complete such tasks 

as sharing data, registering, updating the device software, and 

receiving mobile device notifications.

1

From the GPSMAP device, select 

ActiveCaptain

.

2

From the 

ActiveCaptain

 page, select 

Wi-Fi Network

 > 

Wi-Fi 

On

.

3

Enter a name and password for this network.

4

From the application store on your mobile device, install and 

open the ActiveCaptain app.

5

Bring the mobile device within 32 m (105 ft.) of the GPSMAP 

device.

6

From your mobile device settings, open the Wi

Fi 

connections page and connect to the Garmin device, using 

the name and password you entered in the Garmin device.

Updating Software with the ActiveCaptain 

App

If your device has Wi

Fi technology, you can use the 

ActiveCaptain app to download and install the latest software 

updates for your device.

NOTICE

Software updates may require the app to download large files. 

Regular data limits or charges from your Internet service 

provider apply. Contact your Internet service provider for more 

information about data limits or charges.
The installation process can take several minutes.

1

Connect the mobile device to the GPSMAP device (

Getting 

Started with the ActiveCaptain App

, page 4

).

2

When a software update is available and you have internet 

access on your mobile device, select 

Software Updates

 > 

Download

.

The ActiveCaptain app downloads the update to the mobile 

device. When you reconnect the app to the GPSMAP device, 

the update is transferred to the device. After the transfer is 

complete, you are prompted to install the update.

3

When you are prompted by the GPSMAP device, select an 

option to install the update.
• To update the software immediately, select 

OK

.

• To delay the update, select 

Cancel

. When you are ready 

to install the update, select 

ActiveCaptain

 > 

Software 

Updates

 > 

Install Now

.

Updating Charts with ActiveCaptain

You can use the ActiveCaptain app to download and transfer the 

latest chart updates for your device. To save space on your 

mobile device, space on the ActiveCaptain card, and download 

time, consider using the ActiveCaptain app to download only the 

areas of the chart you need.

4

ActiveCaptain

 App

Summary of Contents for GPSMAP 8500



































































Reviews: