Garmin GPSMAP 8400 series, Owner'S Manual

Page: 64 / 82

Video Setup : Sets up the video ( VIRB Action Camera Video
Setup Settings , page 56 ).
Edit Overlays : Adjusts the data shown on the screen
( Customizing the Data Overlays , page 5 ).
VIRB Action Camera Video Setup Settings
NOTE: Not all options and settings apply to all camera models.
Select OneHelm™, A/V, Gauges > VIRB® > Menu > Video
Setup .
Aspect : Sets the video aspect ratio.
Video Mode : Sets the video mode. For example, you can select
the Slow-Mo option to shoot slow motion videos.
Video Size : Sets the size or pixel dimensions of videos.
Video FPS : Sets the frames per second.
Video Timestamp : Adds the date and time a video was
recorded.
Photo Timestamp : Adds the date and time a photo was taken.
Photo Size : Sets the size or pixel dimensions of photos.
Field of View : Sets the zoom level.
Lens Mode : Sets which lens or lenses the camera uses while
shooting video.
Mirror : Allows you to flip or mirror the video.
Rotation : Allows you to rotate the camera angle.
Adding the VIRB Action Camera Controls to Other
Screens
Before you can control a VIRB action camera with the
chartplotter, you must connect the devices using a wireless
connection ( Connecting a Wireless Device to the Chartplotter ,
page 8 ).
You can add the VIRB action camera control bar to other
screens. This allows you to start and stop recording from other
functions in the chartplotter.
1
Open the screen to which you want to add the VIRB action
camera control bar.
2
Select Menu > Edit Overlays > Bottom Bar > VIRB Bar .
When viewing a screen that has the VIRB action camera
controls, you can select to open the full screen view of the
VIRB action camera.
HDMI Video Considerations
NOTICE
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the video source or display. Do not connect a media player stick
directly into the back of the chartplotter. Using different cables or
connecting a media player stick into the back of the chartplotter
voids your warranty.
These chartplotter models allow video input from HDMI video
sources, such as a Chromecast ™ device. You can view
protected HDMI content (HDCP content) on the MFD
chartplotter screen, but not on an external screen. You cannot
view any HDCP content on a screen connected to the GPSMAP
8700 black box. Check the video source's manual to verify that
HDCP can be turned off for the source.
HDMI video is shared across the Garmin Marine Network, but it
is not shared across the NMEA 2000 network. HDCP content is
not shared across the Garmin Marine Network.
Through the HDMI OUT port, you can display the chartplotter on
an external screen, such as a television or monitor. You cannot
view HDCP content on an external screen.
The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft)
long. If you need a longer cable, you should use an active HDMI
cable only. You need an HDMI coupler to connect the two HDMI
cables.
You need a Garmin GPSMAP USB OTG adapter cable to power
a media player stick. The USB port can supply up to 2.5 W to
power a media player stick.
You must make all cable connections in a dry environment.
Devices
Item Device
HDMI source, such as a Chromecast device
GPSMAP chartplotter
Monitor, such as a computer or television
Connections
From To Cable
HDMI source's HDMI
OUT port Chartplotter's HDMI IN
port
Garmin HDMI Cable
Chartplotter's HDMI
OUT port Monitor's HDMI IN
port
Garmin HDMI Cable
Chartplotter's USB
OTG/USB port HDMI source's USB
port
GPSMAP USB OTG
adapter cable to
power the HDMI
source, if possible
(2.5 W maximum)
Controlling HDMI Audio
You can control the audio for HDMI video sources.
1
From an HDMI video source, select Menu .
2
Select an option:
• To turn off the audio, select
Off .
The icon appears on the video screen.
• To play the HDMI audio, select On .
The icon appears on the video screen.
• To always play the HDMI audio, even when you are not
viewing the HDMI video, select Always On .
The icon appears on the video screen.
Pairing the GC
™
100 Camera with a Garmin
Chartplotter
Before you can connect a wireless device to the chartplotter
wireless network, you must configure the chartplotter wireless
network.
1
With the camera within an unobstructed 76 m (250 ft.) of the
chartplotter, quickly press three times.
2
On the chartplotter, select Settings > Communications >
Wireless Devices > Garmin Camera > Start .
3
Follow the on-screen instructions.
Device Configuration
System Settings
Select Settings > System .
Sounds and Display : Adjusts the display and audio settings.
56 Device Configuration