2-2
ENSTROM 480B RFM SUPPLEMENT
FAA Approved: Jul 2/14
Report No. 28-AC-061
Jun 5/14
Figure 2-1. Traffic Map Page
Displaying traffic on the Traffic Map Page:
1. Turn the large FMS knob to select the Map Page Group.
2. Turn the small FMS knob to select the Traffic Map
Page.
3. Select the OPERATE Softkey to begin displaying traffic.
‘OPERATING’ is displayed in the Traffic mode field.
4. Select the STANDBY Softkey to place the system in the
Standby mode. ‘STANDBY’ is displayed in the Traffic
mode field.
5. Turn the RANGE Knob clockwise to display a larger
area or counter-clockwise to display a smaller area.
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
level of this Rotorcraft Flight Manual Supplement.
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
