background image

GPSMAP 700 Series Owner’s Manual 

21

Charts and 3D Chart Views 

Animated Tide and Current Indicators

You can view indicators for animated tide station and current direction on the Navigation chart or the Fishing 

chart. To do so, information for tide station and current direction must be available in your preloaded map or 

BlueChart g2 Vision region. You must also select the Animated value for the  

Tides/Currents setting (

page 8

).

An indicator for a tide station appears on the chart as a vertical bar graph with an arrow. A red 

arrow pointing downward indicates a falling tide, and a blue arrow pointing upward indicates a 

rising tide. When you move the cursor over the tide station indicator, the height of the tide at the 

station appears above the station indicator.
Current direction indicators appear as arrows on the chart. The direction of each arrow indicates 

the direction of the current at a specific location on the chart. The color of the current arrow 

indicates the range of speed for the current at that location. When you move the cursor over the 

current direction indicator, the specific current speed at the location appears above the direction indicator.

Direction 

Indicator

Color

Current Speed 

Range

Yellow

0 to 1 knot

Orange

1 to 2 knots

Red

2 or more knots

Viewing Current Station Information

See “Current Information” (

page 37

).

Detailed Road and Point of Interest Data

BlueChart g2 Vision contains detailed road and point of interest (POI) data, which includes highly detailed 

coastal roads and POIs such as restaurants, lodging, local attractions, and more. 

Searching for, and Navigating to, POIs

See “Where To?” (

page 33

).

Auto Guidance

Auto Guidance automatically creates and suggests the best path to a destination, based on available BlueChart 

g2 Vision chart information. Auto Guidance is available when you navigate to a destination using Guide To 

(

page 26

).

Configuring Auto Guidance Settings

See “Auto Guidance Line Configurations” (

page 45

). 

Tide 

Station 

with Falling 

Tide

Summary of Contents for GPSMAP 720





































































































Reviews: