Garmin GPSMAP 720 Page 12 Owner'S Manual Download

Page: 12 / 100

GPSMAP 700 Series Owner’s Manual

Charts and 3D Chart Views

Showing and Configuring Tides and Currents

You can show and configure tide and current information on the Navigation chart or the Fishing chart.
1. From the Home screen, select

Charts

2. Select

Navigation Chart

Fishing Chart

3. Select

Menu

4. Select

Navigation Chart Setup

Fishing Chart Setup

5. Select

Tides/Currents

6. Complete an action:

• Select

to show current station indicators and tide station indicators on the chart, or select Off to hide

current station indicators and tide station indicators.

• Select

Animated

to show animated tide station indicators and animated current direction indicators on

the chart (

page 21

Viewing Details about Navaids

From the Navigation chart, the Fishing chart, Perspective 3D, or Mariner’s Eye 3D, you can view details about

various types of navigation aids, including beacons, lights, and obstructions. See (

page 10

) to configure the

appearance of navaid symbols.

NoTe

: The Mariner’s Eye 3D chart view is available only if you use a BlueChart g2 Vision SD card

(

page 16

). The Fishing chart is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card,

or if your built-in map supports Fishing charts.
1. From the Home screen, select

Charts

2. Select

Navigation Chart

Fishing Chart

Perspective 3D

, or

Mariner’s eye 3D

3. Select a navaid with the cursor ( ).

An option describing the navaid appears, such as

Beacon

Light

4. Select the name of the navaid (or

Review

and then the name of the navaid) or to view details about the

navaid.

Navigation Chart Appearance

Changing the Map Orientation

You can set the perspective of the map in the Navigation chart or the Fishing chart.
1. From the Home screen, select

Charts

2. Select

Navigation Chart

Fishing Chart

3. Select

Menu

4. Select

Navigation Chart Setup

Fishing Chart Setup

5. Select

Chart Appearance

orientation

6. Complete an action:

• Select

North Up

to set the top of the map to a north heading.

• Select

Head Up

to set the top of the map according to the heading data received from a heading sensor

(also known as magnetic heading) or to use GPS heading data. The heading line appears vertically on

the screen.

• Select

Course Up

to set the map so the direction of navigation is always up.

Changing the Map Zoom Detail

You can adjust the amount of detail shown on the map, at different zoom levels, for the Navigation Chart or

the Fishing chart.
1. From the Home screen, select

Charts

2. Select

Navigation Chart

Fishing Chart

3. Select

Menu

4. Select

Navigation Chart Setup

Fishing Chart Setup

Summary of Contents for GPSMAP 720





































































































Search results

Summary of Contents for GPSMAP 720

Reviews:

Related manuals for GPSMAP 720

Brands by name

Popular brands

Garmin GPSMAP 720, Owner'S Manual

Search results

Summary of Contents for GPSMAP 720

Reviews:

Related manuals for GPSMAP 720

Brands by name

Popular brands