Garmin GPSMAP 60CS Owner'S Manual Download Page 95

Page: 95 / 108

GPSmap 60CS

Appendix

Data Field Deﬁnitions

Time of Day -

The current time and date. It can be displayed in 12 or 24

hour format in local time or universal (UTC) time.

To Course -

Your direction of travel to get back on course.

Trip Odometer -

The running total of distance traveled since the Trip

Computer was reset.

Trip Time - Moving -

The length of time your vehicle has been in

motion, since the Trip Computer was reset.

Trip Time - Stopped -

The length of time that the vehicle has been

stopped (stationary) while the unit was powered On and tracking your
location (since the Trip Computer was reset).

Trip Time - Total -

The total time the unit has been tracking since the

Trip Computer was reset.

Turn -

The direction of, and distance to, the next turn on an active route.

Velocity Made Good -

The rate of closure on a destination based upon

your current speed and course of travel.

Vertical Speed -

The rate of altitude gain/loss over time.

Vertical Speed Dest -

The measurement of your rate of acsent/decsent to

a predetermined altitude.

Water Speed -

The data acquired from measurement devices interfaced

to the GPSmap 60CS is used to calculate your current speed over water.

Summary of Contents for GPSMAP 60CS













































































































Search results

Summary of Contents for GPSMAP 60CS

Reviews:

Related manuals for GPSMAP 60CS

Brands by name

Popular brands

Garmin GPSMAP 60CS, Owner'S Manual

Search results

Summary of Contents for GPSMAP 60CS

Reviews:

Related manuals for GPSMAP 60CS

Brands by name

Popular brands