background image

50 

GPSMAP 5000 Series Owner’s Manual

Using Radar

U

Sin

G

 

r

adar

Configuring Other Vessels on the Radar Screen

You can configure which other vessels are displayed on the radar screen. From the Radar screen, 

touch 

Menu

 > 

other Vessels

.

 

Note: 

To configure Automatic Identification System (AIS) information for other boats, your 

chartplotter must be connected to an external AIS device.

List

—display a list of AIS and MARPA threats. Touch 

Show

 to select between displaying 

aiS

 or 

MaRPa

 threats, or 

all threats

.

Display Setup

—configure how other vessels are displayed on the Radar screen.

Display Range

—set the distance from your location that AIS vessels are displayed.

Details

—show or hide details for each vessel.

Proj. Heading

—set the projected heading time.

Collision alarm 

(AIS and MARPA only)—turn a safe zone around your boat on or off. This is used 

for collision avoidance, and can be customized.

To customize safe-zone settings for the Collision Alarm:

1.  From the Radar screen, touch 

Menu

 > 

Other Vessels

 > 

Collision Alarm

.

2.  Select from the following options:

Range

—change the measured radius of the safe zone ring to a specified distance from 500 ft. 

to 2.0 nm (or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi).

Time To 

(Safe Zone)—sounds an alarm if AIS or MARPA determines that a target will 

intersect the Safe Zone within the defined time interval (ranging from 1 to 24 minutes).

Advanced Radar Configuration

To access advanced radar settings, from the Radar screen, touch 

Menu

 > 

Radar Setup

.

Rotation Speed

 (GMR 18/24/404/406 series models only)—set the rotation speed of your radar to 

Normal Speed

 or 

High Speed

. High Speed increases the speed at which the antenna rotates, which 

increases the speed at which the screen updates.

Front of Boat

—offset the front of the boat if you mount the radar at an angle.

Data Bars

—show or hide cruising, navigation, fishing, fuel, or sailing numbers (

page 7

).

appearance

—configure radar display options.

Color Scheme

—change the colors used for the radar display.

orientation

—change the perspective of the radar display.

Look-ahd Spd—

shift your current location toward the bottom of the screen as your speed 

increases. Enter your top speed for the best results.

Heading Line

—show or hide a line in the direction of travel.

Rings—

show or hide the radar range rings.

Nav Lines

—show or hide a colored line that indicates the route you are currently navigating.

Waypoints

—show or hide waypoints that are within the range displayed on the Radar screen. 

Touch 

Navigation only

 to display only waypoints associated with the currently active route.






Summary of Contents for GPSMAP 5215





















































































Reviews: