Creating a Route
To create a route using the Find menu:
1. Press
MENU
twice to open the Main Menu.
2. Highlight the
Route
tab.
3. Highlight the first available blank route slot, and press
ENTER
.
4. Press
ENTER
again to find items to add to the route.
Route Tab
Adding Points to the Route
To create a route graphically:
1. From the
Route
tab, highlight the first blank slot, and press
ENTER
.
2. On the Route Review Page, press
MENU
to open the Options menu.
3. Highlight
Edit on Map
, and press
ENTER
.
4. Highlight a map item, and press
ENTER
.
5. When finished, press
QUIT
twice to return to the Route Review Page.
Route Review Page
Options Menu
Creating a New Route
on the Map
Adding Via Points to Your Route
To add Via Points to your route in Automotive Mode:
1. While navigating your route, press
NAV/MOB
.
2. Use the
ROCKER
to select
Edit Vias
, and press
ENTER
. The
Add/Edit Vias Page appears.
3. With the
Add Via Point
button highlighted, press
ENTER
.
Navigate Options
Add Via Point
4. Highlight either
Use Map
or
Use Find Menu
, and press
ENTER
.
5. If you selected
Use Map
, use the
ROCKER
to select an item on the
map, and press
ENTER
.
If you selected
Use
Find Menu
, select an item from the Find menu.
Remember you can press
MENU
while the Find menu is open to find
an item near another location, such as the destination.
6. Highlight
Done
, and press
ENTER
to apply the new Via Points to the
route.
Add/Edit Vias Page
New Via Point Added
Before the Destination
Before a Via Point
is Added
Marking a Waypoint
To mark your current location:
1. Press and hold
ENTER/MARK
until
the New Waypoint Page appears.
2. To accept the waypoint with the
default name and symbol, highlight
OK
, and press
ENTER/MARK
.
3. To change the any information on
the New Waypoint Page, highlight
the appropriate field and press
ENTER/MARK
. After entering and
confirming your changes, highlight
OK
, and press
ENTER/MARK
.
To create a new waypoint using the Map Page:
1. Press
PAGE
until the Map Page appears.
2. Move the pointer to a map location or map feature.
3. Press and quickly release
ENTER/MARK
to capture the pointer
location.
If you have highlighted a map feature, an information page appears
after you press
ENTER/MARK
. Use the
ROCKER
to highlight
Save
and press
ENTER/MARK
to save the item as a waypoint. The New
Map Waypoint Page appears.
4. To accept the waypoint with the default name and symbol, highlight
OK
and press
ENTER/MARK
.
To change any information on the New Map Waypoint Page, highlight
the appropriate field and press
ENTER/MARK
. After entering and
confirming your changes, highlight
OK
and press
ENTER/MARK
.
Keypad Usage
IN/OUT
—press to zoom in or out on the Map Page.
PAGE/MODE
—press to cycle through the main pages in
sequence or end an operation in progress and return to the
main page. Press and hold to switch between Marine Mode and
Automotive Mode.
QUIT
—press to cycle through the main pages in reverse sequence,
revert to the previous value in a data entry field, or cancel a
function.
ENTER/MARK
—press to select a highlighted option, initiate
entry, and then confirm. Press and hold to mark a waypoint.
MENU/Wx
—press to view Options Menu for the current page.
Press twice to display the Main Menu. Press and hold to turn the
Map Page weather off and on.
NAV/MOB
—press to display the Navigation Menu window. In
Marine Mode, press and hold to activate the MOB function. In
Automotive Mode, press and hold to display the Next Turn Page
and have the voice prompt announce the next turn.
FIND
—press to display the Find Menu.
POWER
—press and hold to turn the unit on or off. Press and
release to adjust the backlighting and external speaker volume.
ROCKER
—press up, down, left, or right to select menu options,
enter data, or move the pointer on the Map Page.
New Waypoint Page
