Garmin GPSMAP 2206 Page 44 Owner'S Manual Download

Page: 44 / 106

GPSMAP 2206/2210 Owner’s Manual

AIN

AGES

AGE

Cartography

The GPSMAP 2206/2210 has a built-in worldwide database, with more detailed

coverage available through the use of optional BlueChart or MapSource data. The

unit shows cartography as long as chart information is available for the selected

range.
The GPSMAP 2206/2210 accepts preprogrammed data cards and is compatible

with the latest BlueChart g2 series marine cartography, which features integrated

mapping, 2-D or 3-D map perspective, tide and current data, improved IALA

symbols, navaids, marinas, boat ramps, and roads.

Map Page with BlueChart g2 Cartography

Map coverage conforms to the following conditions:

• Cartography appears when the selected zoom range is covered by either the

internal database, BlueChart, or BlueChart g2 data.

• When the selected zoom range is covered by both the internal database and

BlueChart or BlueChart g2 data, the cartography with the best resolution

appears.

• When the selected zoom range exceeds the resolution of the data in use,

overzoom cartography appears and an overzoom warning appears below

the range.

Using Built-In Basemap

Using BlueChart/BlueChart g2/MapSource Data

Overzoom, No Additional Data

Summary of Contents for GPSMAP 2206











































































































Search results

Summary of Contents for GPSMAP 2206

Reviews:

Related manuals for GPSMAP 2206

Brands by name

Popular brands

Garmin GPSMAP 2206, Owner'S Manual

Search results

Summary of Contents for GPSMAP 2206

Reviews:

Related manuals for GPSMAP 2206

Brands by name

Popular brands