Garmin GPSMAP 198C Owner'S Manual Download Page 3

Page: 3 / 126

GPSMAP 198C Sounder Owner’s Manual

NTRODUCTION

BOUT

HIS

ANUAL

NTRODUCTION

Thank you for choosing the Garmin

GPSMAP

198C Sounder.

The GPSMAP 198C Sounder utilizes the proven performance of

Garmin GPS and full-featured mapping to create an unsurpassed

portable GPS receiver. Take a moment now to compare the contents

of this package with the packing list on the outside of the box. If

any pieces are missing, contact your Garmin dealer immediately.
Before you begin working with the GPSMAP 198C Sounder,

review the installation instructions listed in the Appendix. If

you have any question about installing your chartplotter, contact

Garmin Product Support or a professional installer.
The GPSMAP 198C Sounder Quick Reference Guide contains

helpful tips on using the unit and performing various navigation

tasks. It’s a good idea to keep the Quick Reference Guide nearby

whenever you are operating your new GPSMAP 198C Sounder.

About This Manual

To get the most out of your new navigation system, take time to

read this manual and learn the operating procedures for your unit in

detail. This manual is organized into the following chapters.
The

Introduction

section contains the Table of Contents as well as

GPSMAP 198C Sounder care information.
The

Basic Operation

section provides you with detailed

information and step-by-step directions for features such as using

the Find Menu, navigating a route, and using waypoints.
The

Main Pages

section provides detailed explanations about each

page in the GPSMAP 198C Sounder and step-by-step directions on

using the pages.
The

Main Menu

section provides detailed explanations about the

Main Menu and how to use it to conﬁgure your unit.
The

Appendix

contains installation instructions, speciﬁcations,

optional accessories, and maintenance information. You can also

ﬁnd warranty and FCC information in the Appendix.

Read the

Safety Information to learn how to install and use your Garmin

GPSMAP 198C Sounder safely and responsibly.

Index

is provided at the end of the manual for reference.

Summary of Contents for GPSMAP 198C































































































































Search results

Summary of Contents for GPSMAP 198C

Reviews:

Related manuals for GPSMAP 198C

Brands by name

Popular brands

Garmin GPSMAP 198C, Owner'S Manual

Search results

Summary of Contents for GPSMAP 198C

Reviews:

Related manuals for GPSMAP 198C

Brands by name

Popular brands