4
GPSMAP 400/500 Series Owner’s Manual
Viewing Information
Selecting the Number of Engines Shown in Gauges
The engine gauges can show information for up to four engines.
1. From the Home screen, select
Information
>
Dashboard
>
Engine
>
MENU
>
Gauge Setup
>
Engine Selection
>
Num.
Engines
.
2. Select the number of engines.
3. Select
Back
.
To select the engines for which information appears in the gauges,
select
Edit Engines
and complete steps 2 through 5 of “Selecting
the Engines Shown in Gauges” (following section).
Selecting the Engines Shown in Gauges
You must manually select the number of engines shown in the
) before you can select the engines for which
information appears in the gauges.
1. From the Home screen, select
Information
>
Dashboard
>
Engine
>
MENU
>
Gauge Setup
>
Engine Selection
>
Edit
Engines
.
2. Select
First Engine
.
3. Select the number of the engine for which you want to view
information in the first gauge or bar.
For example, if you select “3,” the first engine bar shows
information for the engine identified as “Engine3” on the NMEA
2000 network.
4. Repeat step 3 for the second, third, and fourth engine bar, as
needed.
5. Select
Back
.
Viewing Engine Gauges
To view engine information, your chartplotter must be connected to
a device capable of measuring fuel level, fuel flow, or both.
From the Home screen, select
Information
>
Dashboard
>
Engine
.
Fuel gauge
Fuel flow
Configuring Engine Gauges
The amount of fuel on board can be represented by either the total
fuel level (numeric) or by individual tank level (graphic).
Summary of Contents for GPSMAP 190-01230-10
Page 1: ...GPSMAP 400 500 series owner s manual...
Page 83: ......
