background image

GPSMAP

®

 10X2/12X2 SERIES

INSTALLATION INSTRUCTIONS

Important Safety Information

 WARNING

Failure to follow these warnings, cautions, and notices could result in personal injury, damage to the vessel or 
device, or poor product performance.
See the Important Safety and Product Information guide in the product box for product warnings and other 
important information.
When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or 
product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product 
specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product 
warranty.

 CAUTION

Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
To avoid possible personal injury or damage to the device and vessel, disconnect the vessel's power supply 
before beginning to install the device.
To avoid possible personal injury or damage to the device or vessel, before applying power to the device, make 
sure that it has been properly grounded, following the instructions in the guide.

NOTICE

For the best possible performance, the device must be installed according to these instructions.
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.

Read all installation instructions before proceeding with the installation. If you experience difficulty during the 
installation, contact Garmin

®

 Product Support.

Contacting Garmin Support

• Go to 

support.garmin.com

 for help and information, such as product manuals, frequently asked questions, 

videos, and customer support.

• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.

Software Update

You may need to update the chartplotter software after installation. For the instructions on how to update the 
software, see the owner's manual at 

www.garmin.com/manuals/GPSMAP10x2-12x2

.

GUID-BF1B0D74-52BF-4F5B-938B-9A7556F36E8C v4

October 2020

Summary of Contents for GPSMAP 12 2 Series



















Reviews: