4. CANCELLING PARALLEL OFFSET NAVIGATION (pg. 56, Pilot’s Guide)
The GARMIN GPS 155/165 software versions 3.07 and higher incorporate a change which cancels parallel offset naviga-
tion when entering the 30 NM arrival approach circle (if an approach is present in the active route to allow approach to
arm). The change also allows indication of “
approach not active
” if parallel navigation is re-instated after approach nav-
igation has been armed.
5. I/O CHANNEL 2 SETUP PAGE
Figure 5. I/O Setup Page
The GARMIN GPS 155/165 software versions 3.07 and higher incorporate a change which adds the I/O Channel 2 Setup
Page to the user-defined settings that are available. The I/O setup page lets you configure the GPS 155/165 to output to
an RS-232 mapping device or a PC (with the optional GARMIN PC Kit or other mapping software) and select the appro-
priate baud rate. The I/O setup page only provides access to I/O channel 2 input/output. For information on using I/O
channel 1, please see your GPS 155/165 installation manual. The input option for channel 2 is intended for future inter-
facing capabilities and is not a selectable option at this time.
To change the output settings for I/O channel 2:
1. Press
S
and rotate
O
until the I/O setup page is displayed
.
2. Use
K
to select ‘off’ or ‘plotting’ for output to an RS-232 device.
3. Rotate
O
to advance the cursor to the baud rate field.
4. Use
K
to select the desired baud rate (300, 1200, 2400, 4800, 9600).
5. Press
CRSR
to finish.
6. SID SELECTION (pg. 79, Pilot’s Guide)
The GARMIN GPS 155/165 software versions 3.07 and higher incorporate a change which allows the pilot to select a SID
from the nearest airport when the active route does not have a departure airport as the first waypoint.
7. OFF-ROUTE DIRECT-TO WAYPOINT (pg. 59, Pilot’s Guide)
The GARMIN GPS 155/165 software versions 3.07 and higher incorporate a change which retains a direct-to waypoint
as an off-route direct-to waypoint if a SID/STAR/Approach procedure waypoint is the active direct-to-waypoint when the
procedure is deleted and only the airport associated with the procedure remains in the active route.
3
?@@@heW2@6X?hW2@6X??@
?@@?heW2@6X?
[email protected]<?B1?h7<?I/??@
?N@?he.M?B1?
@?f?W.Ye@?e@?h@?f?@W26Xe?@@6X??)T26Xe)T26X??W2@6Xf@?hf?J5?
@?fW.Y?e@?e@?h@?f?@(MB1f?V1??@(MB1e@(MB1??7Y?V1f@?hfW.Y?
@?e?W.Yf@?e@?h@?f?@H??@eW2@@@??@H??@e@He@??@@@@@f@?he?W.Y
?J@Le?.Y?f3=?C5?h3=?O.??@e?@e*Ue@??@e?@e@?e@??3X?f?J@LheW&Y?
?@@@heV4@0Y?hV4@0Y??@e?@eV4@@@??@e?@e@?e@??V4@@?e?@@@he&@@@@?
?W26X?eW26X
?@
?7<I/?e7<I/
)T26X?
?W2@6XeJ@L?e?J@L
?@f@(MB1?
?7<?B1e@@@?e?@@@
?@f@He@?
?@e?@eN@H?e?N@H
?@f@?e@?
?3=?C5e?@g@?
?@f@?e@?
?V4@0Ye?@g@?
@?
?W26X?eW26X
W2@6X?eW2@?eW2@6X??W2@6X
?J@L
?7<I/?e7<I/
7<?B1??W.Mf7<?S1??7<?S@
?W2@6Xe@?e@??@@@he?W2@6XeJ@L?e?J@L
3=e@??7Y?f@?W&@??@?W&@
?7<?B1e@?e@??N@Hhe?7<?B1e@@@?e?@@@
V4@@@??@@@[email protected]@[email protected]@
?@e?@e@??J@?e@?he?@e?@eN@H?e?N@H
?W5??@eB1e@(Y?@??@(Y?@
?3=?C5e3=O&@?e3=O.h?3=?C5e?@g@?
O.Y??3=?C5e3U?C5??3U?C@
?V4@0YeV40R'?eV40Yh?V4@0Ye?@g@?
?@0Ye?V4@0YeV4@0Y??V4@0R