Garmin GNS 530W, Pilot'S Manual & Reference

Page: 42 / 230

2 - NAV PAGES
32
If no flight plan or direct-to destination has been
selected only speed, track, altitude, fuel flow and min-
imum safe altitude data may be displayed. All other
data types appear as blank lines — on the Default NAV
Page — until a destination is selected.
To select a different data item for any data field:
1. Starting with the Default NAV Page, press the
MENU key to display an options menu.
2. Turn the
large right
knob to highlight
“Change Fields?” and press ENT to select this
option.
3. Use the large right knob to highlight the data
field you wish to change.
4. Turn the
small right
knob to display the list
of available data items. Continue turning the
small right knob to select the desired data
item from the list.
Once “Change Fields?” is selected, use the
large right knob to select the field you wish
to change and the small right knob to select
the new data type.
5. Press
ENT
to select the desired data item and
return to the Default NAV Page.
6. Press the
small right
knob to remove the
cursor from the page.
Restoring Factory Settings
You can also quickly return all data field settings to
their original factory settings.
The “Restore Defaults?” option returns all
data fields to their original factory settings.
To restore all four selectable data fields to factory
default settings:
1. Starting with the Default NAV Page, press the
MENU
key to display an options menu.
2. Turn the
large right
knob to highlight the
“Restore Defaults?” option and press
ENT
.
Dual Unit Considerations
A “Crossfill?” option is provided from the Default
NAV Page. This option allows you to transfer a direct-
to destination, the active flight plan, any stored flight
plan or user waypoints to a second 400W or 500W-
series Garmin unit.
Some crossfill operations can be done automati-
cally. If the crossfill method in both 500W (or 400W)-
series units is set to “auto”, a change in the direct-to
destination or active flight plan on one unit can also be
seen on the other. See Section 4 - Flight Plans - Flight
Plan Catalog Options for additional details on using
the “Crossfill?” option.
NOTE:
The databases of the 400/500 series and the
400W/500W are incompatible so you may not mix
systems.
Default NAV Page