Garmin GNC 255 Pilot'S Manual Download Page 17

Page: 17 / 64

2-1

190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

BASIC OPERATION

2.1

Power On

Turn the GNC 255 on by either turning the

Power/Com

Volume/

Squelch

knob clockwise to turn the power on or, if installed,

turning on the master switch that powers the radios.

2.2

Com Radio

2.2.1

Selecting a Com Frequency

New frequencies are first selected as a Standby frequency and then toggled to

the Active side with the

FLIP/FLOP

key. While viewing the Standby frequency

display, use the

LARGE

and

SMALL

knobs on the right side of the GNC 255 to

select the desired frequency.

1. Press

C/N

, if necessary, to reach the Com radio function. The

COM annunciator on the top line of the display will show.

2. Turn the

LARGE

knob to change the values in one MHz

increments. The MHz selection range is between 118 and 136
in one MHz steps.

3. Turn the

SMALL

knob to change the values in 25 kHz or 8.33

kHz increments. The kHz selection range is between 000 and
975 kHz in 25 kHz steps or 000 and 990 kHz in 8.33 kHz steps.

4. Turn the

LARGE

and

SMALL

knobs clockwise to increase and

counterclockwise to decrease the frequency values. Standby
frequency selection is not inhibited during transmit.

5. When connected to a position source, nearby station identifiers

will be shown for the selected frequency. Frequencies with
multiple types will have an asterisk next to the identifier.

Asterisk Indicates Multiple Types

Exist For The Selected Frequency

Identifier and Type Shown For

The Selected Frequency

Figure 2-1 Com Frequency Selection

6. Press and release the

FLIP/FLOP

key to toggle the Standby

frequency to the Active frequency.

Summary of Contents for GNC 255

































































Search results

Summary of Contents for GNC 255

Reviews:

Related manuals for GNC 255

Brands by name

Popular brands

Garmin GNC 255, Pilot'S Manual

Search results

Summary of Contents for GNC 255

Reviews:

Related manuals for GNC 255

Brands by name

Popular brands