Garmin GMA 240, Installation Manual, Page: 21 / 42

190-00917-01 GMA 240 Installation Manual
Rev. D Page 3-1
3 INSTALLATION PROCEDURE
3.1 Unpacking Unit
Carefully unpack the equipment and make a visual inspection of the unit for evidence of damage incurred
during shipment. If the unit is damaged, notify the carrier and file a claim. To justify a claim, save the
original shipping container and all packing materials. Do not return the unit to Garmin until the carrier has
authorized the claim.
Retain the original shipping containers for storage. If the original containers are not available, a separate
cardboard container should be prepared that is large enough to accommodate sufficient packing material to
prevent movement.
3.2 Electrical Connections
All electrical connections to the GMA 240 are made through two 44-pin D-subminiature connectors (see
Figure 3-1 ). Section 4 defines the electrical characteristics of all input and output signals. Required
connector and associated hardware are supplied in the connector kit (P/N 011-00652-00). See Appendix B
for interconnect wiring diagrams.
Check wiring connections for errors before inserting the GMA 240 into the rack. Incorrect wiring could
cause internal component damage.
NOTE
Non-Garmin part numbers shown are not maintained by Garmin and consequently are
subject to change without notice.
Table 3-1 Pin Contact Part Numbers
Manufacturer 22-28 AWG
Garmin P/N 336-00021-00
Military P/N M39029/58-360
AMP 204370-2
Positronic MC8522D
ITT Cannon 030-2042-000
Table 3-2 Recommended Crimp Tools
Manufacturer
Hand
Crimping Tool
High Density 22-28 AWG
Positioner Insertion/Extraction Tool
Military P/N M22520/2-01 M22520/2-09 M81969/1-04
Positronic 9507 9502-4 M81969/1-04
AMP 601966-1 601966-6 91067-1
Daniels AFM8 K42 M81969/1-04