Basic Autopilot Operation
Heading Screen
The heading screen displays the status of the autopilot.
Autopilot status information and icon.
Standby and
appear in gray when the autopilot is in standby mode.
Heading Hold and
appear in green when the autopilot is engaged.
Numeric heading information.
Shows the actual heading when the autopilot is in standby mode.
Shows the intended heading when the autopilot is engaged.
Actual heading (when the autopilot is engaged).
The magenta line shows the actual heading on the compass rose.
Intended heading (when the autopilot is engaged).
The yellow line is shown when using the helm control to adjust the heading. The autopilot steers the
vessel until the actual heading aligns with the intended heading.
Rudder position indicator.
NOTE: This functionality is available only when a rudder sensor is connected
Standby Mode
CAUTION
The autopilot does not steer the boat in standby mode. You are responsible for controlling the helm when the
autopilot is in standby mode.
In standby mode, you can engage the autopilot and adjust settings.
Standby and at the top of the heading screen appear in gray when the autopilot is in standby mode.
2
Basic Autopilot Operation
