Adjusting the Sensitivity of the Shadow Drive Feature
You can adjust the sensitivity of the Shadow Drive feature to change how much manual helm activity it takes to
disengage the autopilot. A higher sensitivity setting will disengage the autopilot with less manual movement of
the helm.
NOTE: The Shadow Drive feature is not available on all autopilot models.
1 From the autopilot screen, select > Autopilot Setup > Shadow Drive > Sensitivity.
2 Adjust the sensitivity higher or lower.
Reactor
™
Autopilot Remote Control
WARNING
You are responsible for the safe and prudent operation of your vessel. The autopilot is a tool that enhances your
capability to operate your boat. It does not relieve you of the responsibility of safely operating your boat. Avoid
navigational hazards and never leave the helm unattended.
You can wirelessly connect a Reactor autopilot remote control to the chartplotter to control the compatible
Reactor autopilot system.
For more information about using the remote, see the Reactor autopilot remote control instructions at
Pairing a Reactor Autopilot Remote Control
1 On the helm control, select > Global Settings > Communications > Wireless Devices > Wireless Remotes
> Autopilot Remote.
2 If necessary, select Enable.
3 Select New Connection.
4 On the remote control, select
> Pair with MFD.
The helm control beeps and shows a confirmation message.
5 On the helm control, select Yes to complete the pairing process.
Changing the Functions of the Reactor Autopilot Remote Control Action Keys
You can change the patterns or actions assigned to the Reactor autopilot remote control action keys.
1 Select > Global Settings > Communications > Wireless Devices > Wireless Remotes > Autopilot Remote
> Button Actions.
2 Select an action key to change.
3 Select a pattern or action to assign to the action key.
Enabling the Autopilot Controls on a Garmin Watch
You can control the Garmin autopilot with a compatible Garmin watch. Go to
Garmin watches.
NOTE: Smart notifications are not available on your watch when the autopilot remote control is enabled.
1 Select > Global Settings > Communications > Wireless Devices > Connect IQ™ Apps > Autopilot Control >
Enable > New Connection.
2 Follow the on-screen instructions.
Autopilot Settings and Configuration
9
