190-02087-10
GDL 50(R)/51(R)/52(R) Installation Manual
Rev. 2
Page A-6
APPENDIX A OUTLINE AND INSTALLATION DRAWINGS
Figure A-6 GDL 5XR Outline and Installation Drawing
GDL 50R=2.76[70.1]
GDL 51R=2.80[71.1]
GDL 52R=2.85 72.4
C.O.G.
NOTE 3
3X 2.215 56.26
GDL 51R=3.20[81.3]
GDL 52R=3.08 78.2
GDL 50R=2.90[73.7]
C.O.G. NOTE 3
.88 22.4
C.O.G.
NOTE 3
GDL 51R
CONNECTOR SHOWN BROKEN
OUT TO REVEAL MOUNTING HOLE
2X 2.250 57.15
3X 4.430 112.5
21.04
.828
7.24
.285
2X 4.500 114.30
6X
.156 3.96
NOTE 4
MOUNTING HOLES FOR #6 100° FLAT HEAD SCREWS.
3.
4.
NOTES:
DIMENSIONS: INCHES[mm]. METRIC VALUES ARE FOR REFERENCE ONLY.
1.
DIMENSIONS ARE NOMINAL AND TOLERANCES ARE NOT IMPLIED UNLESS SPECIFICALLY STATED.
2.
CENTER OF GRAVITY (C.O.G.) LOCATION SHOWN IS WITHOUT CONNECTOR KIT INSTALLED.
GDL 5XR UNITS
(GDL 52R SHOWN)
1.63 41.4
6.16 156.4
GDL 50R
6.46 164.2
127.0
5.00
.12 3.0
GDL 52R