GDL 40 Installation Instructions
7
Important Safety and
Product Information
WARNING
This product, its packaging, and its
components contain chemicals known to
the State of California to cause cancer,
birth defects, or reproductive harm. This
Notice is being provided in accordance
with California’s Proposition 65. If you
have any questions or would like additional
information, please refer to our Web site at
NOTICE
The NMEA 2000 BUS that powers this
device must be protected by a 3A fuse to
avoid damage to the device.
FCC Compliance
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
This product does not contain any user-
serviceable parts. Repairs should only
be made by an authorized service center.
Unauthorized repairs or modifications
could result in permanent damage to the
equipment, and void your warranty and your
authority to operate this device under Part
15 regulations.
Industry Canada Compliance
Category I radiocommunication devices
comply with Industry Canada Standard
RSS-210. Category II radiocommunication
devices comply with Industry Canada
Standard RSS-310.
This device complies with Industry Canada
license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference,
and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Radiofrequency Radiation
Exposure Information
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with
minimum distance of 7.9 in. (20 cm)
between the radiator and your body.
This transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
Declaration of Conformity
Hereby, Garmin, declares that this product is
in compliance with the essential
requirements and other
relevant provisions of
Directive 1999/5/EC. To view
the full Declaration of
Conformity, go to
End User License Agreement
BY USING THE GDL 40, YOU AGREE TO BE
BOUND BY THE TERMS AND CONDITIONS
OF THE FOLLOWING END USER SOFTWARE
LICENSE AGREEMENT. PLEASE READ THIS
AGREEMENT CAREFULLY AND IF YOU DO NOT
AGREE TO THESE TERMS AND CONDITIONS,
RETURN THE COMPLETE PRODUCT WITHIN 7
DAYS OF THE DATE YOU ACQUIRED IT FOR A
FULL REFUND (IF PURCHASED NEW) TO THE
ENTITY FROM WHICH YOU PURCHASED THE
PRODUCT.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you
a limited license to use the software embedded in this
device (the “Software”) in binary executable form in
the normal operation of the product. Title, ownership
rights, and intellectual property rights in and to the
Software remain in Garmin and/or its third-party
providers.
You acknowledge that the Software is the property
of Garmin and/or its third-party providers and
is protected under the United States of America
copyright laws and international copyright treaties.
You further acknowledge that the structure,
organization, and code of the Software, for which
source code is not provided, are valuable trade secrets
of Garmin and/or its third-party providers and that
the Software in source code form remains a valuable
trade secret of Garmin and/or its third-party providers.
You agree not to decompile, disassemble, modify,
reverse assemble, reverse engineer, or reduce to
human readable form the Software or any part thereof
or create any derivative works based on the Software.
