Installation With Encoder Diagram
You can add more than one camera to your network when you use an encoder.
GC 14
1 A fuse or circuit breaker (required, not included)
1
12 Vdc power source
BNC to BNC coaxial video cable (not included)
Network cable
Power-over-Ethernet isolation coupler (GPN 010-10580-10)
Garmin Marine Network cable
Axis
®
Q7424 Encoder (optional/not included)
Compatible Garmin chartplotter
Composite video ground loop isolator (not included)
Troubleshooting
Video Does Not Appear on the Chartplotter Screen
• Verify all cables are firmly connected.
• Verify the video cable is connected to the camera video output port.
Image on the Chartplotter Screen is Dim or Dark
• Verify the lens is clean. If necessary, wipe the lens with a soft, clean cloth.
• If the camera is exposed to too much direct light, change the camera position or location.
• Adjust the contrast on your chartplotter. See your chartplotter manual for instructions.
1
You must connect the camera power wire to the battery through a 1 A fuse or circuit breaker. If you omit a fuse or circuit breaker, the camera can malfunc
tion.
3
