Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
238
Flight ManageMent
SY
Ste
M
O
Ve
RV
ie
W
Flight
in
St
RUM
ent
S
ei
S
aUD
iO P
anel
& C
n
S
Flight
M
ana
ge
M
ent
ha
Za
RD
aV
O
iD
an
Ce
a
FCS
a
DD
iti
O
nal
Fea
tUR
eS
a
PP
en
D
iC
eS
in
D
eX
Selecting the active flight plan waypoint as the direct-to destination:
1)
From
Home
, touch
¯
to choose the active flight plan waypoint as the direct-to destination, and return to the
Direct To Screen.
2)
Touch the
Activate
¯
Button to activate the direct-to.
Or:
1)
From
Home
, touch
Flight Plan.
2)
Touch
¯
button to choose the active flight plan waypoint as the direct-to destination, and return to the
Direct To Screen.
3)
Touch the
Activate
¯
Button to activate the direct-to.
Selecting the active flight plan waypoint as the direct-to destination using the GDU Controller:
1)
On the GDU Controller, press the
¯
Button to display the Direct To Window.
2)
Press the
ENT
Key or the small
PFD
Knob to accept the selection and move the cursor to the
ACTIVATE?
field.
3)
Press the
ENT
Key or the small
PFD
Knob to activate the direct-to.
Any waypoint contained in the active flight plan can be selected as a direct-to waypoint from the Active Flight
Plan Window on the PFD. Also, any NRST, RECENT, or USER waypoint can be selected as a direct-to waypoint
from the Active Flight Plan Window on the PFD. This is done via the Waypoint Submenu.
Figure 5-79 Waypoint Submenu
Waypoint Submenu
- Flight Plan Waypoints
- Nearest Airports
- Recent Waypoints
- User Waypoints
Any FPL, NRST, RECENT, or USER waypoint can be selected as a direct-to destination in the Direct To Window
on the PFD.
Selecting a FPL, NRST, RECENT, or USER waypoint as a direct-to destination using the GDU
Controller:
1)
Press the
¯
Key. The Direct To Window is displayed (with the active flight plan destination as the default
selection or a blank destination if no flight plan is active).
2)
Turn
the small
PFD
Knob counter-clockwise one click to display a list of flight plan waypoints (the FPL list is
populated only when navigating a flight plan).
3)
If necessary, turn
the small
FMS
Knob clockwise to display the NRST, RECENT, or USER waypoints.
4)
Turn
the large
FMS
Knob clockwise to select the desired waypoint.
5)
Press the
ENT
Key. The cursor is now displayed on ‘ACTIVATE?’.
6)
Press the
ENT
Key again to activate the direct-to.
This manual downloaded from http://www.manualowl.com