Speaker Connections
These component tweeters are designed for use with Fusion Signature Series speakers.
The tweeter contains an internal passive crossover, and no additional crossover module is required. You must
connect the speaker wire from the stereo to the same wires as the Fusion Signature Series speaker using the
included 2 m (6.5 ft) cable. You should use 16 AWG (1.3 through 1.5 mm
2
) or larger speaker wire if an extension
is required.
SG-TW10 Component Tweeter
Fusion Signature Series speaker
2 m (6.5 ft) cable (included with the SG-TW10 Component Tweeter)
Speaker wire harness (included with the Fusion Signature Series speaker)
Speaker wire from the stereo (not included)
You should use a water-tight connection method when connecting the wires from the speakers to the
stereo.
4