Specifications
Amplifier class
Class D
Frequency response
10 Hz to 40 kHz (-3 dB @ 4 Ohm rated power)
Peak power output
2000 W
Rated power output
4 Ohm: 100 W RMS x 8 @ 14.4 Vdc input < 1% THD+N (EIA/CEA-490A)
2 Ohm: 140 W RMS x 8 @ 14.4 Vdc input < 1% THD+N (EIA/CEA-490A)
4 Ohm bridged: 280 W RMS x 4 @ 14.4 Vdc input < 1% THD+N (EIA/
CEA-490A)
Input sensitivity
0.3 Vdc to 8 Vdc RMS, adjustable
Input impedance
7 kOhm nominal
Signal to noise ratio
85 dB @ rated power output, 4 Ohm
53.1 dB @ 1 W, 4 Ohm
Separation/crosstalk
60 dB
High-pass/low-pass filter
User selectable
Filter crossover frequency
32 Hz to 320 Hz, user adjustable
Filter crossover slope
12 dB/octave
Bass boost
0 to 9 dB, user adjustable (ZONE 2 and ZONE 4 only)
Operating voltage
10.8 to 16 Vdc
Remote turn-on
6 Vdc threshold
Current draw (@14.4 Vdc input)
Standby: less than 1 mA
Idle: less than 2.5 A
Max: 100 A
Fuse rating
4 @ 40 A ATC blade-type (SAE J1171 compliant)
NOTICE
To maintain ignition protection compliance in accordance with SAE J1171,
replace only with J1171 fuses, such as a Bussmann
™
ATC-40. Using non-
compliant fuses may damage the amplifier and voids your warranty.
Protection circuits
Reverse voltage
Input under/over voltage
Over temperature
Output short circuit
Compass-safe distance
50 cm (20 in.)
Operating temperature range
From 0 to 50°C (from 32 to 122°F)
Storage temperature range
From -20 to 70°C (from -4 to 158°F)
Water rating
Must be installed in a dry location
Weight
5.2 kg (11.5 lb) with the cover installed
14
