background image

Wiring Harness Wire and Connector Identification

Wire Function

Wire Color/
Number

Notes

Power (+)

Red

Connects to the positive terminal of a 12 Vdc power source 
capable of supplying 15 A.

Ground (-)

Black

Connects to the negative terminal of a 12 Vdc power source 
capable of supplying 15 A. This wire should be connected before 
connecting the red wire. All accessories connected to the stereo 
must share a common ground location.

Amplifier on

Blue

Connects to an optional external amplifier to turn it on when the 
stereo turns on.

Dim

Orange

Connects to the boat's illumination wire to dim the stereo screen 
when the lights are on.
The gauge of the illumination wire must be suitable for the fuse 
supplying the circuit it is connected to.

Speaker zone 1 left (+) White

Speaker zone 1 left (-)

White/black

Speaker zone 1 right (+) Gray

Speaker zone 1 right (-) Gray/black

Speaker zone 2 left (+) Green

Speaker zone 2 left (-)

Green/black

Speaker zone 2 right (+) Purple

Speaker zone 2 right (-) Purple/black

Auxiliary in left
Auxiliary in right

Provides a red and white RCA stereo line input for audio sources, 
such as a CD or MP3 player.

Zone 1 line out left
Zone 1 line out right

Provides a full-range output to an external amplifier, and is associ­
ated with the volume control for zone 1.

Subwoofer out

Provides a single mono output to a powered subwoofer or 
subwoofer amplifier.
A connected subwoofer is associated with the volume control for 
zone 1.

Fusion MS-RA60 Installation Instructions

5

Summary of Contents for Fusion MS-RA60











Reviews: