Setting the Tuner Region
You must select the region you are in to receive AM and FM
stations properly.
If you are connected to a compatible DAB module and antenna
(not included), you must select the region you are in to receive
DAB stations properly.
NOTE:
DAB stations are not available in all regions.
1
Select >
SETTINGS
>
TUNER REGION
.
2
Select the region you are in.
Changing the Radio Station
1
Select an applicable source, such as
FM
.
2
Select repeatedly to move through the tuning modes:
• Select
AUTO
to scan and stop on the next available
station.
• Select
MANUAL
to select a station manually.
• Select
PRESETS
to select a saved station preset.
3
Select or to tune to the station.
Presets
You can save your favorite AM stations and FM stations as
presets for easy access.
Saving a Station as a Preset
1
With an applicable source selected, tune the stereo to a
station.
2
Select >
PRESETS
.
3
Select
SAVE CURRENT
.
TIP:
You can quickly save the selected station as a preset by
holding .
Selecting a Preset from a List
Before you can select a preset from a list, you must save at
least one station as a preset.
1
Select the applicable source.
2
Select >
PRESETS
.
3
Select a preset from the list.
Removing Presets
1
With an applicable source selected, select >
PRESETS
>
REMOVE PRESET
.
2
Select an option:
• To remove one preset, select the preset.
• To remote all presets, select
REMOVE ALL PRESETS
.
DAB Playback
When you connect a compatible Digital Audio Broadcasting
(DAB) module and antenna, such as the FUSION MS-DAB100A
to the FUSION MS-BB100 stereo, you can tune in to and play
DAB stations.
DAB broadcasts are not available in all regions. When the
stereo is not set to a compatible region, the DAB source is not
available.
Setting the Tuner Region
You must select the region you are in to receive DAB stations
properly.
1
Select >
SETTINGS
>
TUNER REGION
.
2
Select the region you are in.
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a
compatible DAB module and antenna (not included) to the
stereo. Because DAB signals are broadcast in select countries
only, you must also set the tuner region to a location where DAB
signals are broadcast.
1
Select the
DAB
source.
2
Select to scan for available DAB stations.
When scanning is complete, the first available station in the
first ensemble found begins playing.
NOTE:
After the first scan is complete, you can select
again to re-scan for DAB stations. When the re-scan is
complete, the system starts playing the first station in the
ensemble you were listening to when you started the re-scan.
Changing DAB Stations
1
Select the
DAB
source.
2
If necessary, select to scan for local DAB stations.
3
Select or to change the station.
When you reach the end of the current ensemble, the stereo
automatically changes to the first available station in the next
ensemble.
Selecting a DAB Station from a List
1
Select the
DAB
source.
2
If necessary, select to scan for local DAB stations.
3
Select >
BROWSE
>
STATIONS
.
4
Select a station from the list.
Selecting a DAB Station from a Category
1
Select the
DAB
source.
2
If necessary, select to scan for local DAB stations.
3
Select >
BROWSE
>
CATEGORIES
.
4
Select a category from the list.
5
Select a station from the list.
DAB Presets
You can save your favorite DAB stations as presets for easy
access.
You can save up to 15 DAB-station presets.
Saving a DAB Station as a Preset
1
With the
DAB
source selected, change the stereo to a DAB
station.
2
Select >
BROWSE
>
PRESETS
>
SAVE CURRENT
.
TIP:
You can quickly save the selected DAB station as a preset
by holding .
Selecting a DAB Preset from a List
Before you can select a DAB preset from a list, you must save at
least one DAB station as a preset.
1
Select the
DAB
source.
2
Select >
BROWSE
>
PRESETS
>
VIEW PRESETS
.
3
Select a preset from the list.
Removing DAB Presets
1
With the
DAB
source selected, select >
BROWSE
>
PRESETS
.
2
Select an option:
• To remove one preset, select
REMOVE PRESET
, and
select the preset.
• To remove all presets, select
REMOVE ALL PRESETS
.
DAB Playback
3