Hole Information
The device calculates the distance to the front and back of the green, and to the selected pin location (
).
Current hole number
Distance to the back of the green
Distance to the selected pin location
Distance to the front of the green
Par for the hole
Map of the green
Moving the Flag
You can take a closer look at the green and move the pin location.
1 From the hole information screen, select START > Move Flag.
2 Select UP or DOWN to move the pin position.
3 Select START.
The distances on the hole information screen are updated to show the new pin location. The pin location is
saved for only the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots, you must enable scoring.
Your device features automatic shot detection and recording. Each time you take a shot along the fairway, the
device records your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the device on your leading wrist and make good
contact with the ball. Putts are not detected.
1 While playing golf, select START > Measure Shot.
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the ball again, putt on the green, or move to the next
hole.
2 Select DOWN to view all recorded shot distances.
Activities and Apps
13
