Device Information
Viewing Device Information
You can view device information, such as the unit ID, software version, regulatory information, and license
agreement.
1 From the watch face, hold
.
2 Select Settings > System > About.
Viewing E-label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.
1 From the watch face, hold
.
2 Select Settings > System > About.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the
product box for product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions (
).
1 Plug the small end of the USB cable into the charging port on your device.
2 Plug the large end of the USB cable into a USB charging port.
3 Charge the device completely.
Tips for Charging the Device
1 Connect the charger securely to the device to charge it using the USB cable (
).
You can charge the device by plugging the USB cable into a Garmin approved AC adapter with a standard
wall outlet or a USB port on your computer. Charging a fully depleted battery takes up to two hours.
2 Remove the charger from the device after the battery charge level reaches 100%.
94
Device Information