Garmin Forerunner 410, Owner'S Manual

Page: 11 / 52

Forerunner 410 Owner’s Manual 5
Getting Started
Configure Your Device
The first time you use your device,
follow the on-screen instructions
to learn how to use the bezel, set
your user profile, and configure the
device.
If you are using an ANT+ heart
rate monitor, select Yes during the
configuration to allow the heart
rate monitor to pair (connect) with
your device. See page 6 for more
information.
The device uses your user profile to
calculate accurate workout data.
Acquire Satellite Signals
To set the correct time of day and
begin using the device, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
noTe : To turn off the GPS receiver
and use the device indoors, see
page 19 .
noTe : You cannot acquire satellites
in power save mode. To exit power
save mode, press enter or quit .
1. Go outdoors to an open area. For
the best reception, make sure the
antenna of the device is oriented
toward the sky.
Antenna
location
2. Touch and hold training to enter
training mode.