Garmin Force, User & Maintenance Manual

Page: 8 / 26

Mount Base Parts
Item Description Service Part Number Details
Mount base rails 50 in. model: S00-01000-33
57 in. model: S00-01000-34 Replacing the Mount Rails , page 25
Mount base shrouds S00-01000-14 Replacing the Mount Shrouds , page 24
Motor bumper S00-01000-19 Replacing the Mount Bumper , page 25
Mount base 50 in. model: S00-01000-05
57 in. model: S00-01000-10 This replacement part includes the base and all of the plastic parts, including the
shrouds, rails, stow support, and motor bumper, fully assembled.
Replacing the Mount Base , page 24
Mount base stow support S00-01000-47 Replacing the Stow Support , page 25
Service Procedures
Replacing the Pull Cable
You can replace the pull cable without disassembling the motor.
1 If necessary, remove the handle from the pull cable
( Removing the Pull Cable Handle , page 8 ).
2
Remove the pull cable from the mount ( Removing the Pull
Cable , page 9 ).
3 Install the new pull cable on the mount ( Installing a New Pull
Cable , page 9 ).
4
Install the handle on the new pull cable ( Installing the Handle
on the Pull Cable , page 9 ).
Removing the Pull Cable Handle
1
Using a #1 Phillips screwdriver, remove the two screws
that secure top of the handle.
8