Garmin FORCE KRAKEN, Owner'S Manual

Page: 19 / 34

Changing the Heading Hold Behavior
You can change the how heading-hold feature maintains the heading of your boat when it is affected by the
wind or the current.
1 On the remote control, select
> Settings > Trolling Motor > Heading Hold.
2 Select an option:
• To keep the boat pointing in the same direction regardless of drift, select Vessel Align.
• To keep the boat pointing in the same direction while accounting for drift, select Go To.
Holding Your Position
Before you can use the anchor lock feature, you must calibrate the trolling motor ( Calibrating the Trolling Motor,
page 5 ).
The anchor lock feature is an autopilot function that uses GPS to set and maintain your position using the
trolling motor, acting as if you deployed a physical anchor.
1 If necessary, drive the boat to a location you want to set the anchor lock.
2 On the remote control or foot pedal, select .
NOTE: You can adjust the anchor lock position 1.5 m (5 ft.) by pressing an arrow key on the remote control,
or by using gesture controls (
Using Gesture Controls to Adjust Your Held Position, page 16 ).
To disable anchor lock, you can press again, or steer with the foot pedal.
Operation 15