40
Customizing Your Device
automatically when you stop moving. This feature is
helpful if your activity includes stop lights or other places
where you must stop.
NOTE:
History is not recorded while the timer is
stopped or paused.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select the activity settings.
5
Select
Auto Pause
.
6
Select an option:
•
To pause the timer automatically when you stop
moving, select
When Stopped
.
•
To pause the timer automatically when your pace
or speed drops below a specified level, select
Custom
.
Enabling Auto Climb
You can use the auto climb feature to detect elevation
changes automatically. You can use it during activities such
as climbing, hiking, running, or biking.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select the activity settings.
5
Select
Auto Climb
>
Status
.
6
Select
Always
or
When Not Navigating
.
7
Select an option:
•
Select
Run Screen
to identify which data screen
appears while running.
•
Select
Climb Screen
to identify which data
screen appears while climbing.
•
Select
Invert Colors
to reverse the display colors
when changing modes.
•
Select
Vertical Speed
to set the rate of ascent over
time.
•
Select
Mode Switch
to set how quickly the
device changes modes.
NOTE:
The Current Screen option allows you to
automatically switch to the last screen you were
viewing before the auto climb transition occurred.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed
or distance using both your elevation change and your
horizontal movement over ground. You
can use it during activities such as skiing, climbing,
navigating, hiking, running, or biking.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap or a
rest during an activity using LAP. You can turn off the
Lap Key setting to avoid recording laps due to accidental
key presses during an activity.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
4
Select the activity settings.
5
Select
Lap Key
.
The lap key status changes to On or Off based on
the current setting.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of
the activity data screens automatically while the timer is
running.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select the activity settings.
5
Select
Auto Scroll
.
6
Select a display speed.
Changing the GPS Setting
For more information about GPS, go to
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select the activity to customize.
4
Select the activity settings.
5
Select
GPS
.
6
Select an option:
•
Select
Off
to disable GPS for the activity.
•
Select
GPS Only
to enable the GPS satellite
system.
•
Select
GPS + GLONASS
(Russian satellite system)
for more accurate position information in situations
with poor sky visibility.
•
Select
GPS + GALILEO
(European Union satellite
system) for more accurate position information in
situations with poor sky visibility.
•
Select
UltraTrac
to record track points and sensor
data less frequently (
NOTE:
Using GPS and another satellite together can
reduce battery life more quickly than using GPS only
(
GPS and Other Satellite Systems, page 40
GPS and Other Satellite Systems
The GPS + GLONASS or GPS + GALILEO options offer
increased performance in challenging environments and
faster position acquisition than using GPS only. However,
using GPS and another satellite system together can reduce
battery life more quickly than using GPS only.
UltraTrac
The UltraTrac feature is a GPS setting that records track
points and sensor data less frequently. Enabling
