F
Ē
NIX
®
5X
37
Viewing Regulatory and Compliance Information
1
From the settings, select
About
.
2
Select
DOWN
until regulatory information appears.
ANT+ Sensors
The device is compatible with these optional, wireless
ANT+ accessories.
• Heart rate monitor, such as HRM-Run™
the Heart Rate Monitor, page 11)
• Bike speed and cadence sensor
Bike Speed or Cadence Sensor, page 37)
• Foot pod
• Power sensor, such as Vector™
• tempe™ wireless temperature sensor
.
For information about compatibility and purchasing
additional sensors, go to
Pairing ANT+ Sensors
The first time you connect a sensor to your device using
ANT+ wireless technology, you must pair the device and
sensor. After they are paired, the device connects to the
sensor automatically when you start an activity and the
sensor is active and within range.
NOTE:
If a heart rate monitor was bundled with your
device, the included heart rate monitor is already
paired with your device.
1
If you are pairing a heart rate monitor, put on the
heart rate monitor
The heart rate monitor does not send or receive data
until you put it on.
2
Bring the device within 3 m (10 ft.) of the sensor.
NOTE:
Stay 10 m (33 ft.) away from other ANT+
sensors while pairing.
3
Hold
MENU
.
4
Select
Settings
>
Sensors & Accessories
>
Add New
.
5
Select an option:
• Select
Search All
.
• Select your sensor type.
After the sensor is paired with your device, the sensor
status changes from Searching to Connected. Sensor
data appears in the data page loop or a custom data
field.
Using an Optional Bike Speed or Cadence
Sensor
You can use a compatible bike speed or cadence sensor
to send data to your device.
• Pair the sensor with your device
.
• Update your fitness user profile information
Up Your User Profile, page 18)
• Set your wheel size
(Wheel Size and Circumference,
(Starting an Activity, page 7)
Training with Power Meters
• Go to
for a list of ANT+
sensors that are compatible with your device (such as
Vector).
• For more information, see the owner’s manual for
your power meter.
• Adjust your power zones to match your goals and
(Setting Your Power Zones, page 19)
.
• Use range alerts to be notified when you reach a
.
• Customize the power data fields
.
Using Electronic Shifters
Before you can use compatible electronic shifters, such
as Shimano
®
Di2™ shifters, you must pair them with
your device
(Pairing ANT+ Sensors, page 37)
. You
can customize the optional data fields
. The f
ē
nix 5X device
displays current adjustment values when the sensor is in
adjustment mode.
Situational Awareness
Your f
ē
nix device can be used with the Varia Vision™
device, Varia™ smart bike lights, and rearview radar to
improve situational awareness. See the owner’s manual
for your Varia device for more information.
NOTE:
You may need to update the f
ē
nix software
before pairing Varia devices
Using Garmin Connect Mobile, page 28)
Foot Pod
Your device is compatible with the foot pod. You can
use the foot pod to record pace and distance instead
of using GPS when you are training indoors or when
your GPS signal is weak. The foot pod is on standby and
ready to send data (like the heart rate monitor).
After 30 minutes of inactivity, the foot pod powers
off to conserve the battery. When the battery is low, a
message appears on your device. Approximately five
hours of battery life remain.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire
GPS signals and pair your device with the foot pod
(Pairing ANT+ Sensors, page 37)
The foot pod is self-calibrating, but you can improve
the accuracy of the speed and distance data with a few
outdoor runs using GPS.
1
Stand outside for 5 minutes with a clear view of the
sky.
2
Start a running activity.
Summary of Contents for Fenix 5x
Page 1: ...FĒNIX 5X Owner s Manual ...
