Garmin eTrex Vista Cx Owner'S Manual Download Page 19

Page: 19 / 112

Transferring Data to a microSD

™

Card

The eTrex Vista Cx is equipped with a pre-installed

microSD card.

To install or remove the microSD card:

1. Remove the battery compartment cover from

the back of the unit.

2. Locate the card slot at the upper-left edge of

the battery tray, and check to be certain the

card is installed in the slot.

3. Press down on the card and release quickly to

eject it from the slot if you plan to replace it with

a card with more memory or pre-loaded maps.

4. Replace the battery cover when ﬁnished.

To transfer map data to the microSD card:

1. Lift the weather cover from the USB port on

the upper back of the unit.

2. Connect the USB cable provided with the unit

to the USB port on your PC and to the mini-

USB port on the back of the unit.

3. Follow instructions for selecting and

downloading maps provided with the

MapSource map data disk.

PUSH

TO EJECT

T aiwan

Installing and removing

the microSD card

PUSH

TO EJECT

Accessing the microSD

card slot

microSD card

location

Battery

compartment

with cover

removed

USB port

weather cover

USB port

microSD card

inserted in

card slot

Contacts on card

must face away

from the batteries.

Accessing the USB port

eTrex Vista Cx Owner’s Manual

ETTING

TARTED

SING

THE

ISTA

Summary of Contents for eTrex Vista Cx

















































































































Search results

Summary of Contents for eTrex Vista Cx

Reviews:

Garmin eTrex Vista Cx, Owner'S Manual, Page: 19 / 112

Search results

Summary of Contents for eTrex Vista Cx

Reviews: