•
Regardless of the screen you are on, press and hold
the enter/mark key (circled in red).
“Mark Waypoint” screen will pop-up:
How to Add a Waypoint by Entering Coordinates
1)
Use up/down keys until the numbers within the flag are
highlighted, then push enter. Name point then select ‘OK’.
2)
Use up/down keys until the ‘N’ ‘W’ section is highlighted,
push enter. Enter the desired N and W coordinates. Click
‘OK’ when done.
- This screen shows decimal degrees. Screen will look
slightly different for other coordinate systems but apply
same steps.
3. After the point name and coordinates are entered, click ‘OK’
on the main screen (in the thought bubble) to save the
waypoint.
eTrex HS