Planning and Riding a Course
You can create and ride a custom course. A course is a sequence of waypoints or locations that leads you to
your final destination.
TIP: You can also create a custom course in the Garmin Connect app and send it to your device (
Course From Garmin Connect, page 13
).
1 Select Courses >
> Course Creator.
2 Select to add a location.
3 Select an option:
• To select your current location on the map, select Current Location.
• To select a location on the map, select Use Map, and select a location.
• To select a saved location, select Saved & Recent > Saved Locations, and select a location.
• To select a location for which you recently searched, select Saved & Recent > Recent Finds, and select a
location.
• To browse for and select a point of interest, select Points of Interest, and select a nearby point of interest.
• To select a city, select Cities, and select a nearby city.
• To select an address, select Search Tools > Addresses, and enter the address.
• To select an intersection, select Search Tools > Intersections, and enter the street names.
• To use coordinates, select Search Tools > Coordinates, and enter the coordinates.
4 Select Add to Course.
TIP: From the map, you can select another location, and select Add to Course to continue adding locations.
5 Repeat steps 2 through 4 until you have selected all locations for the route.
6 If necessary, select an option:
• Hold on a location and drag it reorder the list.
• Swipe left and select to remove a location.
7 Select an option:
• To calculate the route, select View Map.
• To calculate the route with the same route back to the start location, select > Out and Back.
• To calculate the route with a different route back to the start location, select > Loop to Start.
A map of the course appears.
8 Select Save > Ride.
Navigation
11
