After you pair successfully, a message
appears, and your device syncs
automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the
bike mount so the front of the device is
oriented toward the sky. You can install
the bike mount on the stem or the
handlebars.
1
Select a secure location to mount the
device where it does not interfere with
the safe operation of your bike.
2
Place the rubber disk on the back
of the bike mount.
The rubber tabs align with the back of
the bike mount so it stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using
the two bands .
5
Align the tabs on the back of the
device with the bike mount notches
.
6
Press down slightly and turn the
device clockwise until it locks into
place.
Installing the Out-Front Mount
NOTE:
If you do not have this mount, you
can skip this task.
1
Select a secure location to mount the
Edge device where it does not
interfere with the safe operation of
your bike.
2
Use the hex key to remove the screw
from the handlebar connector .
Quick Start Manual
3
