Garmin Drivesmart 55, Owner'S Manual

Page: 18 / 28

Traffic Receiver Subscriptions
A regional traffic data subscription is included with most traffic
receivers. You can add subscriptions for additional regions to
your traffic receiver. For more information, go to garmin.com
/traffic .
Viewing traffic subscriptions
Select Settings > Traffic > Subscriptions .
Adding a subscription
You can purchase traffic subscriptions for other regions or
countries.
1
Select Settings > Traffic .
2
Select Subscriptions > .
3 Write down the FM traffic receiver unit ID.
4 Go to www.garmin.com/fmtraffic to purchase a subscription
and get a 25-character code.
The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5 Select Next on the device.
6
Enter the code.
7
Select Done .
Enabling traffic
You can enable or disable traffic data.
1
Select Settings > Traffic .
2
Select the Traffic tick box.
Viewing traffic on the map
The traffic map shows colour-coded traffic flow and delays on
nearby roads.
1
From the main menu, select Apps > Traffic .
2
If necessary, select > Legend to view the legend for the
traffic map.
Searching for traffic incidents
1
From the main menu, select Apps > Traffic .
2 Select > Incidents .
3 Select an item in the list.
4
If there is more than one incident, use the arrows to view
additional incidents.
Voice Command
NOTE: voice command is not available for all languages and
regions, and may not be available on all models.
NOTE: Voice Activated Navigation may not achieve desired
performance when in a noisy environment.
Voice command allows you to use your device by saying words
and commands. The voice command menu provides voice
prompts and a list of available commands.
Setting the wake-up phrase
The wake-up phrase is a word or phrase you can say to activate
voice command. The default wake-up phrase is OK Garmin.
TIP: you can reduce the chance of accidental voice command
activation by using a strong wake-up phrase.
1
Select Apps > Voice Command > > Wake-Up Phrase .
2
Enter a new wake-up phrase.
The device indicates the strength of the wake-up phrase as
you enter the phrase.
3
Select Done .
Activating voice command
1
Say OK Garmin .
The voice command menu appears.
2 Say a command from the menu.
3 Respond to the voice prompts to complete the search or
action.
Voice Command tips
• Speak in a normal voice directed at the device.
• Reduce background noise, such as voices or the radio, to
increase the accuracy of the voice recognition.
• Say commands as they appear on the screen.
• Respond to voice prompts from the device as needed.
• Increase the length of your wake-up phrase to reduce the
chance of accidental voice command activation.
• Listen for two tones to confirm when the device enters and
exits voice command.
Starting a route using voice command
You can say the names of popular, well known locations.
1 Say OK Garmin .
2
Say Find Place .
3
Listen for the voice prompt and speak the name of a location.
The device displays a list of search results.
4
Say the line number of the location you want.
The device displays the location on the map.
5
Say Navigate .
Muting Instructions
You can disable the voice prompts for voice command without
muting the device.
1
Select Apps > Voice Command > .
2
Select Mute Instructions > Enabled .
14 Voice Command